Case studies

Real challenges from the greenhouse, solved with a tailored approach

In the trade press you can read how growers got a grip on labour and production with ProCC. Every company had its own challenge, and each time we configured the system around their crop and way of working.

Years of experience
10+
Growers worldwide
100+
Countries
15+
Articles in the trade press
13

Growers from our case studies

  • Florensis
  • Gardener’s Pride
  • VieVerde
  • Royal Roses
  • Kainz & Mayer
  • Jungpflanzen Scherr
  • IJsselgrow
Featured in
Customer case studies

A selection of the challenges we have solved

Every grower faces their own challenge. Here is a selection, from roses in Stompwijk to cuttings in Portugal. Below each case study you’ll find the articles in which growers tell their story.

Young plants (cuttings)Portugal · 200+ workers in peak season

Florensis

Production and labour data at the end of the day instead of after two days.

01The challenge
More than 200 people work at the Portuguese location of Florensis in peak season. Production and labour were recorded on paper and then processed in Excel, so the figures were only available after about two days.
02The approach
We spoke with managers, team leaders and workers and, together with Florensis, built on the QR codes the company was already using, instead of introducing a new way of working. In the first field tests, smartphones did not always read the QR codes well because of light and reflections. So together we chose Bluetooth handheld scanners, which proved faster and more reliable. Team leaders now handle registration for teams of about 20 to 30 workers.
03The result
The data is ready at the end of every working day. That saves 4 to 5 hours of administration per day, the planner gains at least an hour per day and teams can be compared with one another.
  • QR codes
  • Bluetooth handheld scanners
  • Registration by team leaders
  • Daily planning
“Direct insight into production and labor enables us to respond much faster in the greenhouse.”
Florensis in BPnieuws
Vegetables and fruit (tomato, cucumber, strawberry)Multiple locations · about 250 workers in peak season

Gardener’s Pride

One registration system for all locations, after three years of experience at one of the sites.

01The challenge
Gardener’s Pride grows tomatoes, cucumbers and strawberries on about 30 hectares, with up to about 250 workers in peak season, a large share of them seasonal workers. Until recently, each location used different software for time and labour registration, and at some locations labour was not registered at all. There was no consistent picture of performance.
02The approach
In 2018 ProCC was already running at the company’s temporary, rented locations: quick to deploy and easy to transfer to other locations. After a broad selection process and three years of experience at one of its sites, Gardener’s Pride chose ProCC for its flexibility and the opportunity to develop custom solutions together. Our team works closely with the company on new features that make registering labour simpler and more efficient.
03The result
On 1 January 2025 Gardener’s Pride switched to ProCC, so that labour is registered the same way at all locations. With the data it collects, the company analyses, for example, the labour hours spent on harvesting and tests new working methods, to work more efficiently and save labour hours.
  • Multiple locations
  • Temporary locations
  • Customisation
  • Uniform registration
“Flexibility was an important reason for us to decide to work with it.”
Marco van Overbeek, Gardener’s Pride (2018)
Fruit and vegetables (strawberry, cucumber)Castenray · about 40 workers

VieVerde

Kilogram registration for strawberries, added at the grower’s request.

01The challenge
VieVerde grows 1.5 hectares of strawberries and 5 hectares of cucumbers. Time and labour were already registered with ProCC, but because the company runs trials with new varieties, owner Ed Classens also wanted to be able to track kilos. For the strawberries, VieVerde also uses many tray types: wooden, blue and transparent trays.
02The approach
For this, we developed kilogram registration. Workers scan a tag on the growing gutter when they go into and out of a row, enter how many crates they have filled and select the tray type. Using fixed data, the system calculates how much has been picked. Strawberry and cucumber run through one app: when registering, you simply choose the crop.
03The result
VieVerde now sees who picks which kilos and uses a bonus scheme for its workers. The company clearly sees how much labour goes into the strawberries and how much into the cucumbers, and, in variety trials, whether a new variety takes extra labour.
  • Kilogram registration
  • Bonus per picker
  • Two crops, one app
  • Time registration at the greenhouse entrance
“We now also see who picked which kilos.”
Ed Classens, VieVerde
Ornamentals (roses, cut hydrangeas)Stompwijk · about 25 workers

Royal Roses

Linked to the rose sorting machine: see how many roses are in each container.

01The challenge
Royal Roses had 3 hectares of greenhouses with roses and cut hydrangeas in Stompwijk. Every day about 40 000 flowers went to the auction, so the business processes had to be clearly mapped. Two crops with very different work processes, and a system that had to fit the business philosophy of an ultra-modern family business.
02The approach
For the roses, ProCC was linked to the rose sorting machine. For the cut hydrangeas, which were bunched by hand, registering labour hours was enough: per variety, how many hours went into each task. Mickey Hogervorst and his brother found in ProCC a flexible system that fitted their business philosophy. Value for money was the deciding factor.
03The result
For each container you could see exactly how many roses were in it and which worker it could be traced back to. For the hydrangeas, registering hours gave insight into the numbers cut per variety.
  • Link to the sorting machine
  • Traceable to the worker
  • Hours per task and variety
“Now we can see exactly how many roses are in a container.”
Mickey Hogervorst, Royal Roses
Vegetable growing (tomato)120+ workers per day in peak season

Kainz & Mayer

Weighing in the greenhouse itself: straight back to an empty cart, as little waiting time as possible.

01The challenge
At Kainz & Mayer, a grower of various tomato varieties, more than 120 workers are at work in the greenhouse every day in peak season. The kilos per hour partly determine the reward for those who perform above the norm, so they must be measured accurately and objectively. But sorting and weighing sometimes took a relatively long time, so workers had to wait for empty carts. That affected the workflow and the reliability of the performance figures.
02The approach
Together we set up a performance system with norms such as plants per hour, kilos per hour and time per row. The waiting was solved by weighing in the greenhouse itself: harvest carts go straight onto a battery-powered mobile weighbridge, and an app sends the weights to the cloud, linked to the right worker.
03The result
Workers immediately have an empty cart again and waiting times are kept to a minimum. Team leaders and management see the production figures in real time, and performance measurement is more accurate and better aligned with the work in the greenhouse.
  • Mobile weighbridge
  • Performance norms
  • Performance pay
Young plants (including tomato, cucumber)Sowing · pricking out · potting

Jungpflanzen Scherr

Labour registered per batch, with labour costs per plant visible sooner.

01The challenge
Jungpflanzen Scherr grows various young plants, including tomato and cucumber plants. For this type of production, insight into the cost price per plant is very important. Registration was done on paper and then entered into Excel by hand: duplicate administration, delays in the data and a greater chance of errors.
02The approach
Together we set up a registration structure that makes it possible to calculate exactly how much labour has gone into a batch of plants. Workers register their activities every day, such as sowing, pricking out and potting, and the quantities per task are tracked on the shop floor. The team leader enters them and links them to the activities and batches, so the registration is correct before it becomes final.
03The result
The information is available digitally straight away. Labour and production are linked, so the labour costs per batch and per plant are visible sooner. That way, the company manages planning, capacity and pricing better.
  • Registration per batch
  • Checked by the team leader
  • Labour costs per plant
Vegetable growing (cucumber)IJsselmuiden

IJsselgrow

From clock cards and clipboards to tag and phone, with a monitoring app that was his own idea.

01The challenge
Cucumber grower Klaas Limburg worked with clock cards, later with badges to clock in and out, and with clipboards on which staff wrote their name at every row. That took a lot of time and too many mistakes were made.
02The approach
With ProCC’s app, registration went fully electronic: workers clocked in and out with a tag, and eight phones replaced the clipboards. On these phones, workers signed in when they started on a new row. In the activities app he defined thirty activities, where another grower might have eight. He contributed ideas when the system came on the market: the monitoring app was his idea.
03The result
In the monitoring app he saw who was working where and how long someone took over a row. He could calculate the labour per unit of product. On a screen in the canteen, workers compared their times, which according to Limburg led to greater engagement with the company.
  • Tags and phones
  • Activities app
  • Monitoring app
  • Canteen screen
“With this I can manage more efficiently, and the workers are more motivated.”
Klaas Limburg, IJsselgrow
Vegetable growing (tomato)Made · 8.5 hectares

Meer Camp

Fewer hours worked with the same number of workers, and the harvest done with one person fewer.

01The challenge
Grower Dirk Pieter van der Meer was only at the location in Made two days a week, so he did not see his workers every day.
02The approach
In January 2017 Meer Camp started using ProCC’s online crop and registration system, with a daily or weekly norm. Anyone below the norm got a cross next to their name, anyone above it a tick. A screen in the canteen showed workers their own figures.
03The result
The number of hours worked was lower than the year before, while the number of workers stayed the same. The harvest was done with one person fewer and the work was finished earlier at the end of the week.
  • Daily and weekly norm
  • Canteen screen
  • Fewer hours worked
“If I want something changed in the system, the supplier adjusts it quickly.”
Dirk Pieter van der Meer, Meer Camp
What the case studies have in common

Problem-solving and flexible, in every greenhouse

No two growers are the same. The common thread is the way we work.

“Impossible doesn’t exist. It will just take time.”
Our motto, in GroentenNieuws (2023)
01

We solve it together, in the greenhouse

If something doesn’t work in practice, we look for a better way together. When smartphones did not always read the QR codes well because of light and reflections, Bluetooth handheld scanners took their place. When workers had to wait for empty carts, weighing was done in the greenhouse itself.

02

Configured for your crop

Roses through the link with the sorting machine, strawberries in kilos based on crates and tray type, young plants per batch. The same platform, configured differently every time.

03

Grows with your business

From temporary rented locations to one registration system for all locations, and from the Netherlands to Portugal. Getting started is easy, and you can expand with other modules later.

04

Developing together

Growers’ requests become features. The kilogram registration for strawberries at VieVerde started as a request from the grower, and according to Onder Glas (2018) the monitoring app was the idea of grower Klaas Limburg. Good ideas from the field become available to all customers.

ProCC in the trade press

All articles at a glance

Trade journalists visited our customers and spoke with our team. From newest to oldest, with links to the originals.

  1. July 2026
  2. February 2026
  3. February 2025
  4. February 2024
  5. April 2023
  6. January 2023
  7. December 2021
  8. November 2020
  9. November 2020
  10. June 2019
  11. February 2019
  12. November 2018
  13. June 2018

Articles are snapshots in time. Features, figures and prices may have changed since. The links open the publisher’s website.

Your challenge, our next case study?

Tell us where the bottlenecks are in your greenhouse. In a demo we’ll show how ProCC solves them, with your crop, tasks and norms.